Add more motors.
The VEX Motor Controller 29 uses a standard PWM signal (like that originating from the 3-wire ports on VEX Microcontrollers) to drive a VEX 2-Wire Motor.
Note: We recommend using no more more than one (1) 3-Wire extension cable in between the Motor Controller 29 and a VEX Microcontroller. For longer extensions, use 2-Wire extension cables in between the Motor Controller 29 and a VEX 2-Wire motor.
Technical Specifications
| Kit Contents |
(1) Motor Controller 29 |
| Downloads & Docs |
VEX Wiki - Motor Controller 29 |
| Battery In |
Max battery voltage: 8.5V (with fully charged 7.2V battery)
Max motor stall current: 3 A |
| Inputs |
- Black Wire:Ground
- Orange Wire:Power
- White Wire:PWM Signal: 1ms - 2ms will give full reverse to full forward, 1.5ms is neutral,
200ms for brake mode (like neutral, but motor terminals shunted together). Brake mode may not be supported by your complier.
|
| Outputs |
- Red & Black Wires:Motor Connections
|
| Microcontroller |
Compatible with 3-wire motor ports on all VEX Microcontrollers |
